Spark Xtra Mail + AI

Connect your Xtra Mail inbox
to Claude, Cursor, any MCP client

Xtra Mail takes a plain password over IMAP, with no app password to generate and no second factor in the way. MCPEmails connects it so your AI agent can read, search, send, reply and file that mail.

1 inbox free, forever Your Xtra password, no app password Email fetched live, never stored

Claude cannot reach an Xtra Mail inbox on its own. MCPEmails is a hosted MCP server that connects it over IMAP at imap.xtra.co.nz on port 993, signing in with your full xtra.co.nz address and your ordinary Xtra Mail password. Spark issues no app-specific passwords for Xtra Mail and states that its two-step verification applies only in the webmail portal and not to email clients, so a correct password authenticates directly even with two-step turned on. Once connected, Claude, Cursor or any other MCP client can read, search, send and organise that mail. One inbox is free, forever.

How Xtra Mail connects: IMAP with the password you already have

Spark publishes imap.xtra.co.nz on port 993 for incoming mail and send.xtra.co.nz for outgoing, with the username given as the full address. Authentication is the mailbox password, unmodified. That is unusual enough in 2026 to be worth stating twice, because Spark's own two-step verification page carries a note at the top saying it is only available in the webmail portal and will not apply to email clients like Outlook, Mail and Gmail. So there is no app password to find, no security page to visit and no second factor to work around, and the entire failure surface reduces to whether the password is right and whether your client meets Spark's transport requirements. Spark does have those: it asks that the app support AES ciphers and TLS 1.0 or higher, and states that RC4, SSL and SSL3 are not supported.

The exact Spark Xtra IMAP and SMTP settings

Copy these into the connect form. MCPEmails prefills them where it can, and retries the other standard transport if the first does not answer.

ProtocolServerPortSecurity
IMAP (incoming)imap.xtra.co.nz993TLS (implicit)
SMTP (outgoing)send.xtra.co.nz465TLS (implicit)

Verified 2026-11-11: imap.xtra.co.nz answered a TLS connection and identified itself as an IMAP server under that name. It advertises LOGIN, PLAIN authentication.

Sign in with: Your full email address, in Spark's own example joe.bloggs@xtra.co.nz.

What your AI can do

A Spark Xtra inbox your agent can actually use

21 action-based MCP tools: send, reply, forward, schedule, and organize. Your agent finishes the job inside Spark Xtra.

  1. 01Read

    Read & search mail

    List, read and search across folders to find that invoice, summarize a thread, or pull the latest from a sender.

  2. 02Send

    Send, reply & forward

    Compose and send real messages, reply in-thread, and forward, directly from your mailbox, not as a draft you finish by hand.

  3. 03Schedule

    Schedule for later

    Queue a message to go out at the right time, so your agent can draft now and send on schedule.

  4. 04Organize

    Move, copy, flag, archive, delete

    Keep the inbox tidy: file mail into folders, flag what matters, archive the rest, or delete on request.

Setup

Connect Spark Xtra in four steps

From sign-up to first AI email in a couple of minutes.

01

Create a free MCPEmails account

Sign up at mcpemails.com. The free plan connects one inbox and does not ask for a card.

02

Make sure the Xtra Mail subscription is active in MySpark

Xtra Mail is a subscription rather than an automatic extra. In MySpark, open Subscriptions under Products, and check that Xtra Mail is there and activated with a mailbox created. If it says Ready to activate, finish that first; there is no mailbox to connect until the create mailbox form is completed.

03

Enter the full address and your Xtra Mail password

In MCPEmails choose IMAP / SMTP and enter the address exactly as Spark writes it, such as joe.bloggs@xtra.co.nz, with the password you use to sign in to Xtra webmail. The hosts and ports above are prefilled and were verified from a live TLS connection.

04

Paste the MCP URL into your AI

Drop https://mcpemails.com/api/mcp into Claude, Cursor or ChatGPT, authorise, and your agent has the inbox.

ChatGPT

Use Spark Xtra in ChatGPT

ChatGPT reaches Spark Xtra through Any Mailbox, the MCPEmails plugin in the ChatGPT plugin directory.

  1. Connect Spark Xtra to MCPEmails with the steps above.
  2. In ChatGPT, open Plugins, find Any Mailbox in the plugin directory and click Install plugin, then Connect.
  3. Sign in to MCPEmails and choose which mailboxes ChatGPT can reach. In a chat, type @ and pick Any Mailbox.
Before you start

What actually goes wrong with Spark Xtra

Xtra Mail has not been a Yahoo service since 2017, so Yahoo advice does not apply

Spark moved Xtra email off Yahoo and onto the New Zealand provider SMX in 2017, migrating hundreds of thousands of mailboxes over about three months. The Yahoo era left a long tail of guides telling xtra.co.nz users to generate a Yahoo app password or to sign in through a Yahoo window. None of that is true any more. There is no Yahoo account behind an Xtra address, and following those instructions leaves you hunting for a security page that does not exist for your mailbox.

Two-step verification protects webmail only, and does not lock out a client

Spark's own two-step verification page states in a note at the top that it is only available in the webmail portal and will not apply to email clients like Outlook, Mail and Gmail. That cuts both ways. It means turning two-step on does not break this connection and you never need an app password, and it means the IMAP door stays password-only whatever you set in webmail. Treat the Xtra Mail password accordingly.

Spark documents port 587 for sending, and port 465 also answers

Spark's setup page lists the outgoing server as send.xtra.co.nz on port 587 with StartTLS. The connection we verified on that same host is port 465 with implicit TLS, which completed a handshake and offered PLAIN and LOGIN. Both are real. The table on this page shows what we tested; if a client insists on the documented combination, 587 with STARTTLS is Spark's published answer and should also work.

SASL-IR and IDLE are advertised now; MOVE and SPECIAL-USE still are not

When this host was first probed in August it announced a minimal list: IMAP4rev1, UIDPLUS, NAMESPACE, ID and the PLAIN and LOGIN mechanisms, with no SASL-IR and no IDLE. On the date shown on this page the same host answered with a Dovecot-style capability list instead: SASL-IR and IDLE present, PLAIN and LOGIN as mechanisms, and UIDPLUS no longer advertised before login. So one-step authentication is accepted and new mail can be noticed on an open connection. What has not changed: no MOVE, so filing runs as COPY, then STORE, then EXPUNGE, and no SPECIAL-USE, so Sent and Trash are matched by name. Spark did not announce the change; it is what the server says today, and the table above follows the server.

Known limits with Spark Xtra

  • Spark's SMTP host announces a maximum message size of about 100 MB, which is generous, but a larger send is still refused before it leaves.
  • MOVE is not implemented, so a move is not atomic. If a connection drops mid-operation a message can briefly exist in both folders.
  • Folder roles are matched by name because SPECIAL-USE is not advertised. If you have renamed Sent or Trash, name the folder when you ask for a move.
FAQ

Spark Xtra and AI: common questions

Does Claude work with Xtra Mail?

Not directly. Claude has no built-in Spark or Xtra connector. Connecting an MCP server such as MCPEmails to the mailbox over IMAP gives Claude read, search, send, reply, schedule and organise access to your xtra.co.nz mail, and the same connection works in Cursor, ChatGPT and other MCP clients.

What are the Xtra Mail IMAP and SMTP settings?

IMAP is imap.xtra.co.nz on port 993 with TLS. Outgoing mail is send.xtra.co.nz, which Spark documents on port 587 with StartTLS and which also answers on port 465 with implicit TLS, the combination we verified. The username is your full email address. Spark documents pop3.xtra.co.nz on 995 as the POP alternative.

Do I need an app password for Xtra Mail?

No. Spark issues none, and its two-step verification page says the feature is only available in the webmail portal and will not apply to email clients. A mail client signs in with your ordinary Xtra Mail password whether or not two-step verification is switched on for webmail.

Who runs Xtra Mail now?

Spark, on a platform supplied by the New Zealand company SMX. Xtra email was hosted by Yahoo from the Telecom NZ era until Spark completed the migration to SMX in 2017. That is why Yahoo-specific instructions still circulating for xtra.co.nz addresses no longer lead anywhere useful.

Is my Xtra mail stored on your servers?

No. Messages are fetched live from Spark over IMAP for each request and passed to your AI client. Credentials are encrypted at rest and message bodies are not retained.

Can ChatGPT read my Spark Xtra mail?

Yes, once Spark Xtra is connected to MCPEmails. Install Any Mailbox from the ChatGPT plugin directory and sign in to MCPEmails. ChatGPT gets only the access you approve, and your mail is fetched live, never stored.

Give your AI an Xtra Mail inbox

One password, no second factor in the way. One inbox free forever, no card required.